The New Sunny Island Generation Is Here!
SMA will present its new Sunny Island generation at Intersolar Munich 2017. The new Sunny Island -12 may look like the old one on the outside but this one is more “communicative”.
What exactly are the differences between the old one and new one?
1. Bye-bye Sunny Remote Control, hello WLAN
We have said good-bye to the old Sunny Remote Control (SRC-20). Now we have WLAN and a web user interface, so with a computer, a tablet or a cellphone with WLAN you can sign in to the Sunny Island to set its parameters, or get information such as current status, events, warning messages and more.
2. New configuration
The new Sunny Island web user interface makes really easy to configure a system. Instead of the old list of parameters, now there is a simple overview of important points (AC-site, DC-site, inverter and more) and we can set different possibilities under each point.
3. Easy system integration
Thanks to the new WLAN feature, we have made easy the system integration. You can connect directly the system into Sunny Places or Sunny Portal via WLAN or web user interface.
This means that an extra SMA communication device is no longer needed in systems with up to four devices, the Sunny Island can sign the router via WLAN and send its data directly to Sunny Portal/Sunny Places.
4. New extended data logging
An advantage for end-users and professionals. We can download detailed data from our system via web user interface, this data can be used for system analysis or in case of failure by SMA service as the new logging intervals goes from seconds to days! With the optional SD card it is possible to extend the monitoring period.
5. Now with a 10-year warranty
How about that? We know that we build the most reliable battery inverters of the market with IP54 and a unique overload capacity compared to other off-grid inverters, so we offer a free warranty extension. The customer just needs to register their product and the warranty automaticall increases from 5 to 10 years.
6. Up to 20% reduction in system costs
And on top of the new communication interface, the extended data logging and the warranty extension, we also offer up to a 17% reduction in system costs for SI 4.4M systems and up to 20% for SI 8.0H systems.
There is also a reduction in installation costs and a time saving wizard for configuration.
7. Exchange of circuit board in the field
Under defined conditions, we are able to exchange the circuit board in the field. If something happens in an installation, this is extremely helpful to the end customer because we do not need to replace the entire inverter if only the circuit board is broken. We can react faster and it is cheaper to replace one part versus the entire inverter.
One last bit of information
The electrical characteristics and chassis stay the same in the new Sunny Island -12 generation as in the -11 generation. The new Sunny Island version -12 will be available in the old 8.0H, 6.0H and 4.4M power classes. The Sunny Island 3.0M will be discontinued.
More Information
For more information visit us at Intersolar Europe or check our product website.
Where can I get a Src-1 sunny remote control??
Hello Tomas,
Please contact your local installer for further assistance.
Alternatively, you may contact our SMA Service, thank you.
Sunny regards
Christiane
Thank you so much, I will, and I hope I can find it.
Hello Tomas,
Please let us know in case you need any further assistance.
Sunny regards
Christiane
Dear Sirs,
I hope this email, find you Well, can you help me on the following issue.
I Would like to know if is it possible to use a Mixed Cluster at a MultiCluster Box 12-2-30, with inverter SB6.0h 12 and SB6.0h 11 at same Cluster?
Best Regards.,
Hello! Is it possible to commission new installations of the 6.0H-11 without an SRC on-site? Would it be possible to install a speedwire module to do the initial QCG over speedwire?
Thanks!
i have bought 3 sunny island 8.0 v12, do i need extra hardware to setup as a 3 phase cluster ?
Hello,
Please check this link to our Multicluster Boxes for the Sunny Island.
Sunny regards,
Carolyn
I have one sunny new sunny island invert er. but is starts and trips immediately. the relay above Ac output trips. what is the solution.
thanks for reply
I am talking about the SI 8.0-11. I have 3 of them
Now I bought another SI8.0-12.( serial number 3000929866 I wanted to use that latest model as a master and my 2 old models as slaves. But I could not get it working.
So I suppose they are not a match.
Is it correct that I can use the new 12 series inverter as a master and the old series
as slave 1 and slave 2??
If I am not mistaken I read it before somewhere that it is possible
Hi Christian,
Sorry, but can you please tell me what inverter you are talking about?
Please leave a detailled product ID as STPTL-10/20/30; or Danfoss TLX6/8/10/12
In case you have serialnumbers ready, do providing as well.
SMA inverter aren`t usually communicating in a, you call it, Master + Slave arrangement.
But in a daisy chained speedwire (Ethernet) either, or in RS485- serial bus communication.
Sunny regards,
Carolyn
Hello SMA corporates
I have been used and familar with the old SMA inverter and configured it more than 10 using remote control, but currently it was replaced by the new one, and I tried to configure it in one training center, but it shows me Warning due to battery sensor missing, and it did not give me AC out put, can you help me?
Hi Sodessa,
Unfortunately it is not possible to help you on the blog. Please contact our Service line at Sunnyisland.service@sma.de and describe explicitly your error, default and problem.
Many thanks in advance.
Annika
Hi Guys,
just wondering when the -12 will be available in Australia? With our retailers (Ergon) restricians we can no longer use the -11 so a great number of our jobs are on the back burner.
Thanks,
Hello Daniel,
please contact SolarAcademy@SMA-Australia.com.au whom can provide more information.
Kind regards,
Carolyn
Hi,
Is it true, that I don’t need speedwire card to communication with sunny home manager 2.0 ?
When is the SI 12 available in the US? Does it work together with the SB 5.0 US in a grid tied with backup configuration?
Hey Peter,
to the knowledge of the technical trainers there is no timeline to have this product available in the U.S.
Kind regards, Tobi
hello i would to purschase one for me home use how can buy one iam in uganda east africa
Hi Luibega,
I forwarded your request to my colleagues in Africa. They will contact you.
Kind regards, Annika
Hi Jennifer. Could I configure the new Sunny Island via Internet or it is possible only in a Local Area Network?
Hi,
Is it possible to emulate the programming of the SI 12 in a SI11 via speedwire module?
Hello Benno,
this is unfortunately not possible.
The settings of a Sunny Island -11 can`t be accepted to a new Sunny Island -12 and conversely.
Kind regards, Jennifer
When will this new SunnyIsland be released in the American markets?
Hello Rudy,
This Sunny Island is a Most of World (MOW) device, so it works in 230/400V 50 or 60Hz. For the US market we develop a Sunny Boy Storage with backup feature. It would be available at the end of 2017.
Kind regards, Jennifer
Very good news! Will older SI be able to work along side the new ones for system expansions?
Hello Rudy,
unfortunatly it is not possible to combine older an newer Sunny Island in one cluster. Within one cluster you have to use all the same devices.
Kind regards, Jennifer